Lifetime 60231 - Page 19

19
TOOLS AND HARDWARE REQUIRED
X SECTION 4 (CONTINUED)
4.3
4.4
CHK (x1)
CHK
BBH
• Once the End Cap is fl ush with the bottom of the Door, insert Self-Drilling/Self-Tapping Screw (CHK) into the Door
Panel at the location shown to hold the Square Tube in place.
• Flush with the Door
• Insert an End Cap (BBH) into the end of the Square Tube (CHI). Gently, fi nish inserting the Tube until it’s fl ush with the bottom of
the Door.