75
TOOLS AND HARDWARE REQUIRED
X SECTION 12 (CONTINUED)
(x4)
(x4)
(Not included)
(Not included)
• To anchor your shed, you must purchase the correct anchoring hardware. For a concrete platform, we
recommend using a hammer drill, 5/16" (8 mm) masonry bit, four (4) 3/8" x 2" (10 mm x 5 cm) Concrete Screws
and four (4) 3/8" x 1" (10 mm x 2,5 cm) Fender Washers. Do not exceed a 3/8" (10 mm) diameter screw. Refer to your
local hardware store for this hardware.
12.1
5/16"
(8 mm)
WARNING
Failure to anchor the shed may result in property
damage and/or personal injury.
To Next Page
Loading...
