76
TOOLS AND HARDWARE REQUIRED
X SECTION 12 (CONTINUED)
(x4)
(x4)
(Not included)
(Not included)
• To anchor your shed, you must purchase the correct anchoring hardware. For a wood-framed platform, we
recommend using a drill, 5/16" (8 mm) drill bit, four (4) 3/8" x 1 1/2" (10 mm x 4 cm) Lag Screws and four (4) 3/8"
x 1" (10 mm x 2,5 cm) Fender Washers. Do not exceed a 3/8" (10 mm) diameter screw. Refer to your local hardware store for
this hardware.
12.1
5/16"
(8 mm)
WARNING
Failure to anchor the shed may result in property
damage and/or personal injury.
To Next Page
Loading...
