Lifetime 60231 - Page 8

8
X SECTION 1 (CONTINUED)
1
!
TOOLS, PARTS, AND HARDWARE REQUIRED
!
• Square the frame, measuring from corner to corner. Measurement A & B should be about the same length.
• Using nails, fasten the plywood to the frame. Then, drill 5/16" (8 mm) holes for drainage.
1.2.3
1.2.4
x32
x18!
• 5/16" (8 mm) Drainage Holes
8d 1 1/2" (8d 3,81 cm) (x32)
48" x 83 3/8" x 3/4"
(1,22 m x 2,12 m x 19,1 mm) (x1)
33 1/2" x 83 3/8" x 3/4"
(85,1 cm x 2,12 m x 19,1 mm) (x1)
48" x 83 3/8" x 3/4"
(1,22 m x 2,12 m x 19,1 mm)
A
B
(x9)
(x9)
33 1/2" x 83 3/8" x 3/4"
(85,1 cm x 2,12 m x 19,1 mm)