Lifetime 6417 - Page 50

50
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
SEC
ADW
ADW
AEE
BBI
AHZ
7.1
7.1
SEC
SEC
Connect the Center Door Handle (AHZ) and the Inside Center Door Handle (BBI) to the Center Door using the hardware
shown.
Orient the Extended Door End Channel (BLH), as shown, and slide the Channel down over the edge of the Center
Door. Insert a Dead Bolt Latch (AHM) into the notch at the bottom of the Center Door, as shown. Slide the
Extended Door End Channel over the Latch.
BBI (x1)
(Not to scale)
AEE (x1)
ADWY
AHZ (x1)
(Not to scale)
AHM (x1)
(Not to scale)
AHM
BLH
AFC
8
8.3
8.4