11
5.1: Insert two Wall Panels (108) along back side of shed. Fasten panels
with Screws (SS). Ensure holes line up.
5
1.
2.
Do Not Over-
Tighten Screws
Hardware Bags:
1001634
SS (10)
Second person should apply pressure
on opposite side of the wall for easy
insertion of screws.
Assemble Back Wall
5.2: Fold Right Back Corner Panel (106). Snap into place
and fasten with Screws (SS).
106
Place Wood Block (BD) directly under
the tab you are inserting. Snap tabs
into place one at a time.
Hardware Bags:
1001634
SS (5)
Drill/Screwdriver
Drill/Screwdriver
108
108