28
Hardware Bags:
1001634
SS (4)
Roof Panel Ridge
13.4: Bottom lip of Roof Panel fi ts over wall panel and ridge fi ts into the top
of the wall. Secure the Roof panel along the bottom edge with Screws (SS).
Be sure the ridge in the bottom of the
Roof Panel fi ts into the top of the wall.
Roof Panel
Wall
13.5: Follow steps 13.2-13.4 and install a Roof Panel and Roof Support on
opposite side.
Hardware Bags:
1001634
SS (11)
(Not actual size)
AG (1)
Drill/Screwdriver
Drill/Screwdriver
Note: The holes in the Roof Support Strips are for
manufacturing purposes only.