TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
31
SEC
Only use a hand screwdriver on
this step
SEC
6.4
Connect the Center Roof Panels, Roof Support Strips, and Center Roof Caps you removed previously as well as
the Center Roof Panels (AGQ), Roof Support Strips (AFL), and Center Roof Caps (AFY) provided with this kit using 1/4” x 5/8”
Phillips Pan-Head Screws (ADZ).
Note: Only use a hand screwdriver on this step.
!
ADZ (x48)
6
ACJ (x8)
AED (x8)
AFL
28 7/8”
The hole at the end of the Roof Support Strip
is for manufacturing purposes only.
To Next Page
Loading...
