TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
21
SEC
BFA (x1)
Connect Ball Needle (BFA) to a ball pump. Moisten Needle and carefully insert it into the Tetherball. Inflate Tetherball to 2 lb.
Check pressure with pressure gauge.
SEC
4.2
4
5
Note: Pump included with your system may vary from the pump shown here. For
pumps with hose attachments, connect Ball Needle to hose before inflating the ball.
!
Use the ball pump provided to infl ate the ball. Do
not infl ate with more than 2 lb. of air pressure.
Overinflation and use of any other pump or
compressor to infl ate the ball may damage the
system and will void the warranty.
CAUTION
!
To Next Page
Loading...
