LEGO VINCENT VAN GOGH - THE STARRY NIGHT 21333 LIGHT KIT INSTALL GUIDE
INSTRUCTIONS 19
Legend
DISCONNECT
CONNECT /
RECONNECT
TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON
Connect the other
end to a 5V USB
Power Bank, 5V USB
Wall Adaptor, or USB
to AA Battery Pack
(sold separately)
If you experience any issues with the lights not working and suspect an issue with a component, please try a dierent port on the expansion board to verify where the fault lies (with the light or
expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.
USB Power Cable
2-Port Expansion Board
50cm Connecting Cable
To Next Page
Loading...
