Light4Me SMART BEAM 90 - Maintenance

7
70-79
Gobo7
80-89
Gobo8
100-109
Gobo8 shake
110-119
Gobo7 shake
120-129
Gobo6 shake
130-139
Gobo5 shake
140-149
Gobo4 shake
150-159
Gobo3 shake
160-169
Gobo2 shake
170-179
Gobo1 shake
180-199
Forwards skipped rotation
from fast to slow
160-199
Forwards rainbow effect
from fast to slow
200-255
Backwards rainbow effect
from slow to fast
11
Prism
0-9
OFF
10-127
ON
128-255
Rotation from slow to fast
20-39
Auto 1
40-59
Auto 2
200-239
Reset all
4. Maintenance
When the lens have fracture and other damage, it should be replaced in time.
when the fixture can't start to run, please check if the fuse of power supply is
burnout, if it is burnout please install the fitted corresponding specification
fuse with 5 x20 T3A / 250 v. 5 mmx20mm). Note it must use the same
specifications fuse. The is installed with overheating protection device, when
it is overheat, the overheating protection device will automatically cut off
power supply. Please check whether the fan running, whether the fan and fan
nets have dust jam, find troubleshooting before working. But note that a