EasyManua.ls Logo

Lightmaxx VECTOR BSW 10R MKII - Troubleshooting; Environmental Protection

Lightmaxx VECTOR BSW 10R MKII
33 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
Cleaning:
Regular cleaning of the device from impurities and dust increases the shelf life of the product. Always
disconnect the device from the power supply while cleaning it Optical lenses should be cleaned with
a dry microfiber cloth. This will also optimize the light output. Never clean the device wet! Ventilation
grilles and openings should always be cleaned of dust and dirt. Compressed air sprays are ideal for this
application.
Environmental protection:
The company Music Store professional GmbH always strives to reduce the burden of packaging to a mi-
nimum. The use of environmentally friendly and recyclable materials is always of elementary importance.
Please return the packaging for recycling after use:
Troubleshooting:
If the specified corrections have not been successful, please contact our service staff. The contact
details can be found at www.musicstore.de.
Note! (Error during data transmission)
Never connect the DMX input or output to audio devices!
DMX cables enable trouble-free operation and the highest possible trans-
mission reliability of signal data. Do not use microphone cables.
The following overview is intended as an aid to rapid troubleshooting. If you are unsure,
contact the manufacturer, the dealer or appropriate specialist personnel. Never open the
device by yourself!
Symptom Troubleshooting
No function Check the mains connection and its fuse.
Check the cable connections.
No reaction in DMX mode If available, try an alternative DMX controller.
DEUTSCH ENGLISH

Related product manuals