Lightolier LyteMode User Manual

10 Basic Setup
Mode Function
0 – Remote Used to trigger Scenes and perform
Master Raise/Lower on ILS Masters.
1 – Global Remote Same as Remote, but transmits a Global
command used to link several ILS
Masters. ILS Masters must be
programmed to respond to the Global
ID.
2 – Remote Keypad Transmits key presses and releases.
LEDs are controlled by Remote
Commands.
3 – IntelliSight (ITS) Controls a connected IntelliSight
Power Pack.

Lightolier LyteMode Specifications

General

Brand	Lightolier
Model	LyteMode
Category	Keypad
Language	English