Lightspeed Redcat Access - Using Flexmike as Wireless Audio Link

15
1. Overview 2. Daily Operation
3. Optional
Accessories
4. Maintenance &
Troubleshooting
5. Warranty, Safety
& Specifications
USING FLEXMIKE AS WIRELESS AUDIO LINK
The Flexmike includes a 3.5mm audio input jack to connect to
an audio source like a laptop or MP3 player. The Flexmike will
transmit the audio signal to be played through the system.
If your system includes two Flexmikes, you can use one mic for
instruction and the second mic to transmit audio through the
system.
1. Plug your external audio equipment
(for example, laptop), into the input
on the Flexmike labeled “INPUT”
using a 3.5mm patch cable (not
included).
AUDIO
INPUT
AUDIO
OUTPUT