Lightspeed Redcat Access - Audio Only Recording; Photo Capture

29
2. Daily Operation
3. Optional
Accessories
1. Overview
4. Maintenance &
Troubleshooting
5. Warranty, Safety
& Specifications
In addition to video recording, teachers can record just the audio of a lesson.
AUDIO ONLY RECORDING
1. Tap the record tab
• Verify the Bluetooth audio connection is present
as indicated by a “headphone” icon in the lower
le hand corner.
• Select Audio at the top of the screen.
2. Select desired audio source
• Note the selected source indicated in the upper
le hand corner of the screen.
• To record microphone audio only, select the class
button. Make sure your microphone is unmuted.
3. Begin recording
• Tap the red record button to begin the audio
recording.
• Tap again when you are ready to stop.
• You will see the last recorded audio file appear as
a thumbnail for quick review.
1
2
1
3
Teachers can also snap still photos of their students to capture student interaction and
classroom activities.
PHOTO CAPTURE
1. Tap the record tab
• Select Photo capture at the top of the
screen.
2. Capture Photos
• Tap the white photo button to capture an
image
• You will see the last photo file appear as a
thumbnail for quick review.
1
2