Lightspeed Redcat Access - Additional Capabilities with Activate App

32
1. Overview 2. Daily Operation
3. Optional
Accessories
4. Maintenance &
Troubleshooting
5. Warranty, Safety
& Specifications
ADDITIONAL CAPABILITIES AVAILABLE WITH
ACTIVATE APP
Additional volume adjustments:
On the Volume tab, the teacher can adjust headphone
volume, Microphone #1 and #2 volume, volume level on
the Topcat audio input, and Activate Audio In and Out.
Enable Sleep mode (1):
Your Topcat comes with sleep mode disabled by default,
keeping it powered on and operable at all times. To
engage sleep mode, toggle it to the ON position in the
settings tab. The Topcat will go into sleep (low power)
mode aer 2 hours of no activity. Wake the system back up
by un-muting a microphone.
Input priority (2):
Turning this feature on gives all priority to an audio source
connected to the amplifier audio input. When an audio
signal is detected, all other audio coming through the
amplifier (including both microphones) will be muted until
the audio input signal ends. Microphone audio will then
automatically come back.
Record out (3):
This allows users to set up Audio Output 2 as a true
recording output to connect to an external video camera.
• When toggled o, this output will provide audio
from the class speaker only. Keep this toggled
o when interfacing with an ALD so the student
receives just the audio from the teacher in whole
class mode.
• When toggled on, this output will provide audio
from any selected audio source - class speaker or
Pod.
• Select Mic or Line level signal depending on the
recording device.
Reset Default Settings:
Pressing this will return the Activate App to its original
settings, including volume levels.
Unpair:
Press this button to unpair your mobile device from the
Activate system. This is useful if you wish to take your
device to pair up with a system next door.
1
2
3