IMPORTANT SAFETY INSTRUCTIONS CONT’D
3
To avoid potential equipment damage and/or serious injury, READ AND FOLLOW all
safety precautions when installing the TOPCAT. WARNINGS are included throughout the
procedural steps in this guide, and are repeated below for emphasis.
• USE A LICENSED ELECTRICIAN FOR POWER CONNECTIONS. The TOPCAT system
uses standard 100 – 240VAC power. Obtain the services of a licensed electrician
when supplying and connecting power to the ceiling enclosure. BE SURE electrical
installation complies with local building codes. Improperly installing and/or
connecting power to the system may result in EQUIPMENT DAMAGE, serious INJURY
and/or DEATH.
• DO NOT INSTALL ALONE. The ceiling enclosure weighs approximately 20 lbs (9 kg),
and requires at least two people to install. DO NOT install alone.
• USE SUITABLE LADDERS. use proper ladders or support platforms when installing
the TOPCAT enclosure. DO NOT stand on chairs, tables, or other unsuitable surfaces.
• SUPPORT THE CEILING ENCLOSURE PROPERLY. DO NOT allow the full weight of
the ceiling enclosure to rest on the tile grid of the ceiling. The ceiling enclosure is
designed to be suspended at TWO POINTS by suspension wires (secured to raers
or other suitable building structure) and to rest LIGHTLY on the tile grid.
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure, that may be suicient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
To Next Page
Loading...