20
REDMIKE CONTROLS CONT’D
5. AUDIO/MICROPHONE INPUT: Use this
input to plug in a laptop, MP3 player or other
audio source to wirelessly transmit audio to be
played through the system. Alternatively, an
external microphone can be connected.
6. CHANNEL SELECT SWITCH (CH A/B): This
switch allows for selection between Channel A
or B. If you are using a single microphone, we
recommend using Channel A.
7. Charger Contacts (+ -): These contacts
interface with the charging tabs in the BC-
RMCC cradle charger for daily charging.
Simply place the REDMIKE in the charger.
8. Group Designation:
G1= Group 1 frequencies
2.06/2.54 MHz
G2= Group 2 frequencies
3.20 / 3.70 MHz
To Next Page
Loading...
