53
REMEMBER: This equipment is designed to
supplement and distribute the user’s voice
so they are able to speak in a conversational
tone. Having the volume set too high will
result in feedback and listener fatigue.
REDMIKE SHARE: INITIAL SET-UP
1. Ensure the REDCAT is ON. The blue LED on
the front panel will glow.
2. Turn on the REDMIKE Share by sliding the
switch to the top position.
3. Grip the barrel in the center section. Avoid
covering the infrared emitters just below the
microphone grille. This could interrupt signal
transmission.
4. While speaking in a normal voice, increase
the CH. B VOLUME on the REDCAT level until
your voice is barely audible.
To Next Page
Loading...
