50
REDMIKE SHARE: CONTROLS AND CONNECTIONS
1. POWER SWITCH
2. POWER/CHARGE INDICATOR: this light
glows blue when turned on and turns off to
indicate low battery level. When charging, the
light glows red.
3. AUDIO INPUT: plug a laptop, MP3 player or
other audio device into this jack to wirelessly
transmit the audio signal to be played through
the system.
4. CHANNEL SELECT SWITCH (CH A/B):
Located in the battery compartment, this
switch is set to Channel B at the factory.
5. CHARGER INPUT: Plug the charging cable
from the REDMIKE cradle charger into this
jack.
To Next Page
Loading...
