61
COMMON PROBLEMS AND SOLUTIONS CONT’D
PROBLEM: Low Volume or Feedback
SOLUTION: Follow these steps to eliminate low
volume or feedback.
• Ensure microphone is positioned
appropriately, just below the collar bone.
• Check volume level on the amplier. If the
volume is too high, feedback will occur.
Adjust accordingly.
• Adjust the volume level on the back of the
optional REDMIKE VC.
PROBLEM: No Sound From Speaker
SOLUTION: Follow these steps to produce
sound from speakers.
• Turn the REDCAT on. Conrm that the POWER
light located on the front panel is on.
• Conrm signal is being received at the
REDCAT. The IR signal light will be RED
indicating a signal is being received.
• Conrm that REDMIKE is turned on. There
will be a BLUE LED on the microphone to
indicate it is powered on.
If you review these instructions and
still have questions, write down the serial
number and model number of your system
and call Lightspeed Technical Services at
800.732.8999, 5 a.m. – 5 p.m., PST.
To Next Page
Loading...
