1. Introduction DA2DVI-HDCP-Pro – User's Manual 6
1.5. Typical Applications
Standalone Application
Daisy-chain Application
POWER
5V
Power over video port
sources (VGA cards, etc.) usually consuming more
than 50 mA (maximum suggested by DVI 1.0 standard).
Lightware devices support 5V 500 mA constant current
output on both of its outputs to power long distance
Universal Power Supply
DA2DVI-HDCP-Pro is equipped with a universal 5V
power adaptor, which accepts AC voltages from 100 to
240 Volts with 50 or 60 Hz line frequency. Special plug
of wall adaptor ensures safe power supply. This type of
connector prevents unwanted extractions.
To Next Page
Loading...