FAQs
Q. Can I use non dimmable bulbs if I don't dim them?
A. No. The bulbs must be dimmable even if they are not dimmed; the
technology in the bulb must be compatible with that of the dimmer.
Q. What if I need a switch to operate on/o only?
A. A LightwaveRF Relay in conjunction with a Wire-free Switch can be used
for on/o switching in place of the dimmer (see www.lightwaverf.house).
Q. Can I separate and change individual switches in multigang dimmers?
A. Multigang dimmers are not designed to have their switch modules
separated and interchanged; disconnecting and removing dimmer modules
will invalidate the warranty.
Q. Can I expect a drop in light output with a LightwaveRF dimmer?
A. LightwaveRF dimmers utilise a tiny amount of power to drive the
electronics that operate the RF radio and dimming components. As a result, it
is normal to experience a 5-10% reduction in light output when using
incandescent bulbs. In the vast majority of cases, this should not be noticeable
to the naked eye.
Q. Is it normal for the dimmer to get warm when it is turned on?
A. Yes, it is perfectly normal for dimmer switches to feel warm to the touch if
left on for a period of time. It is completely safe.
To Next Page
Loading...