Lillipad Diving Board - Table of Contents

TABLE OF CONTENTS
Introduction .............................................................................................................................................. 3
Intended Use ............................................................................................................................................. 4
Safety………………………………………………………………………………………………………………………………………………….5
Boat Specifications for Approved Mounting ............................................................................................. 6
Approved and Unapproved Mounting Locations…………………………………………………………………………………7
Installing Mounting Hardware .................................................................................................................. 8
Daily Assembly Procedure ....................................................................................................................... 12
Docking & Storage ................................................................................................................................... 13
Care & Maintenance ............................................................................................................................... 13
Return Authorization Policy ............................................................. ……………………………………………………14
Limited Warranty ……………………………………………………………………………………………………………………………...15
PACKAGE CONTENTS: DIVING BOARDS WITH UNDERFLOOR MOUNT KITS
 Main Frame/Diving Platform
 Ladder Assembly
 Shock Assembly
 Stabilizer Bar
 (6) 6mm Machine Screws
 (1) ¼” X 2 ¼” Quick Release Pin
 (2) 3/8” X 2” Quick Release Pins
 (1) 3/8” X 1 ½” Button Lock Pin
 (1) ½” X 2 ½” Clevis Pin with Key
 (3) 10mm Eye Bolts
 (3) 10mm Plug Screws
 (3) Under-Floor Mounting Plates
 Owners Manual
PACKAGE CONTENTS: DIVING BOARDS WITH SURFACE MOUNT KITS
 Main Frame/Diving Platform
 Ladder Assembly
 Shock Assembly
 Stabilizer Bar
 (1) ¼” X 2 ¼” Quick Release Pin
 (2) 3/8” X 2” Quick Release Pins
 (1) 3/8” X 1 ½” Button Lock Pin
 (1) ½” X 2 ½” Clevis Pin with Key
 (3) 10mm Eye Bolts
 (3) Stainless Steel Surface Plates
 (9) #12 *1 ¼ Stainless Steel Screws
 (1) 6MM Screw
 (1) Washer
 (1) Nylock Nut
 Owners Manual
Make sure you have received the contents listed then record the following information for future
reference: Date of purchase, location, serial number. Keep a copy of your receipt.
2