Page 30 of 71
Driving to favourite positions
After saving the favourite positions, the user can reach the positions simply by tilting/pressing the DPG1B.
1. Tilt/press and hold - when a saved position has been reached, the desk stops.
2. Release DPG1B within one second.
This way the user can easily change between sitting and standing height without looking at the DPG1B in the
meantime. The DPG1B will stop at the saved favourite position(s) which means up to two different positions
during the stroke length of the desk.
When the desk stops at a favourite position, the user can
• keep tilting/presssing the DPG1B for more than one second
or
• release the DPG1B and immediately tilt/press it again.
The desk will move past the favourite position and continue its movement.
Figure 23: Tilt/press to drive desk
To Next Page
Loading...
