To Next Page
U
umeyerAug 15, 2025
What to do if my Linak TECHLINE LA36 has no motor sound or movement?
- TThomas AlexanderAug 15, 2025
If your Linak Controller's piston rod isn't moving and there's no motor sound, here's what you can check: 1. Ensure the actuator is properly connected to the power supply or external control unit. 2. Inspect the fuse, and replace it if it's burned out. 3. Examine the cable for any damage, and replace if necessary. 4. For IC Advanced models, verify that the power supply polarity is correctly connected to avoid damage. Also, check the wire connection on the internal control unit.
General
