To Next Page
D
Diane BarrettAug 9, 2025
What to do if my Linak TR-EM-239-H is overheating?
- CCourtney GeorgeAug 9, 2025
If your Linak Controller is overheating, stop the system and wait until it cools down.
What to do if my Linak TR-EM-239-H is overheating?
If your Linak Controller is overheating, stop the system and wait until it cools down.
What to do if Linak TR-EM-239-H Controller is disconnected on account of over current?
If the Linak Controller is disconnected due to over current, the issue might be caused by a too heavy load. Try releasing some of the load from the actuators. Also, verify that the value parameter 5 is correct.
How to fix deviation in pulses of Linak TR-EM-239-H Controller?
To fix a deviation in pulses in the Linak Controller, initialize the system.
General| Brand | Linak |
|---|---|
| Model | TR-EM-239-H |
| Category | Controller |
| Language | English |
Provides essential safety guidelines for connecting, installing, and using the system.
Describes the different versions and fitting methods for the TR-EM-239 motor control unit.
Details the terminal connections for the TR-EM-239 motor control unit.
Introduces the TR-EM-236 programming unit for parameter configuration.
Lists the adjustable parameters for the TR-EM-239 control unit.
Provides detailed explanations for each adjustable parameter.
Describes the procedure for initialising the system for identical actuator operation.
Explains how to interpret error codes indicated by the red LED.
Details how errors are reset when actuators are restarted.
