Lincoln Electric Air Vantage 600X-I User Manual (English)

Questions and Answers:

K
kguzmanAug 11, 2025
What to do if my Lincoln Electric Air Vantage 600X-I Welding System engine will not crank?
- H
  Heather HatfieldAug 11, 2025
  If your Lincoln Electric Welding System engine won't crank, several issues could be the cause. It could be due to a low battery, loose battery cable connections, faulty wiring in the engine starting circuit, or a faulty engine starter. Additionally, check if the check engine light is on or inspect the 30A breaker (ECU). In any of these cases, it's best to contact your Field Service Facility or an authorized local Engine Service Shop for assistance.
A
Alan HorneAug 17, 2025
Why does my Lincoln Electric Welding System engine shut down shortly after starting?
- J
  Jason ParrishAug 18, 2025
  If your Lincoln Electric Welding System engine shuts down soon after starting, it might be due to low oil pressure (engine protection light lit), high oil temperature (engine protection light lit), a faulty oil pressure switch, or a faulty oil temperature switch. You should check the oil level and engine cooling system. If the oil pressure or temperature switch is faulty, contact an authorized local Engine Service Shop.
B
Beth HoffmanAug 25, 2025
What to do if Lincoln Electric Air Vantage 600X-I has no welding output but auxiliary output is OK?
- X
  xparkerAug 25, 2025
  If your Lincoln Electric Welding System has no welding output but the auxiliary output is working, ensure the WELDING TERMINALS switch is in the 'WELDING TERMINALS ALWAYS ON' position. The issue could also stem from a faulty Weld Control PCB, Idler/Engine Protection PCB, or Chopper PCB.
D
Dr. Greg Miller PhDAug 29, 2025
How to fix Lincoln Electric Welding System engine that will not idle down to low speed?
- J
  Julie HamiltonAug 29, 2025
  If your Lincoln Electric Welding System engine won't idle down to low speed, first ensure the idler switch is set to AUTO, not HIGH. The problem might also be due to a faulty relay or a faulty Weld Control PCB (Printed Circuit Board).
V
Victoria ByrdSep 4, 2025
Why Lincoln Electric Air Vantage 600X-I battery does not stay charged?
- B
  brandonterrySep 4, 2025
  If the battery in your Lincoln Electric Welding System isn't staying charged, the cause could be a faulty battery, a faulty engine alternator, a loose or broken lead in the charging circuit, or a loose fan belt that needs tightening.

Lincoln Electric Air Vantage 600X-I Specifications

General

Model	Air Vantage 600X-I
Max Output	600 Amps
Output Range (Stick)	20-600A
Output Range (TIG)	20-600A
Type	Engine-Driven Welder/Generator
Processes	Stick, TIG
Engine	Diesel
Idle Control	Automatic
Emissions Compliance	EPA Tier 4 Final