Lincoln Electric IDEALARC SVM136-A User Manual

SVM136-A
November 1997
Safety Depends on You
Lincoln arc welding and cutting
equipment is designed and built
with safety in mind. However,
your overall safety can be in-
creased by proper installation . . .
and thoughtful operation on
your part. DO NOT INSTALL,
OPERATE OR REPAIR THIS
EQUIPMENT WITHOUT
READING THIS MANUAL AND
THE SAFETY PRECAUTIONS
CONTAINED THROUGHOUT.
And, most importantly, think
before you act and be careful.
SERVICE MANUAL
World’s Leader in Welding and Cutting Products Premier Manufacturer of Industrial Motors
Sales and Service through subsidiaries and Distributors Worldwide
22801 St. Clair Ave. Cleveland, Ohio 44117-1199 U.S.A. Tel. (216) 481-8100
For Machines with Code Numbers 10084 thru 10087
IDEALARC
®
CV-400
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
View Safety Info View Safety Info View Safety Info View Safety Info
RETURN TO MAIN INDEX

Lincoln Electric IDEALARC SVM136-A Specifications

General

Brand	Lincoln Electric
Model	IDEALARC SVM136-A
Category	Welding System
Language	English

Summary

Safety Precautions

General Safety Warnings

Covers California warnings, engine safety, and EMF hazards.

Electric Shock, Fumes, and Gases Safety

Addresses electric shock prevention and safe handling of fumes/gases.

Fire, Spark, Cylinder, and French Safety

Installation Procedures

Technical Specifications

Installation Safety, Location, and Handling

Critical safety rules, placement, and handling guidelines for installation.

Electrical Connections and Configuration

Procedures for grounding and connecting the main power supply.

Input Settings and Reconnect Procedure

Input wire, fuse size, and voltage reconnection settings.

Output Connections and Wire Feeder Setup

Operation Guide

Operating and Safety Instructions

Welding Capability, Limitations, and Controls

Troubleshooting and Repair

Using the Troubleshooting Guide

PC Board Troubleshooting

Output and Welding Problem Diagnosis

Symptom-based troubleshooting for output and welding problems.

Component Testing Procedures

Detailed tests for transformers, contactors, SCRs, and diodes.

Waveform Analysis for Troubleshooting

Component Replacement Procedures

Step-by-step guides for replacing common parts.

Electrical Diagrams

Wiring Diagrams

Schematics showing internal wiring for different machine codes.

PC Board Diagrams