Need help?Do you have a question about the Lincoln Electric IDEALARC SP-200 and is the answer not in the manual?
General| Output Amperage | 200A |
|---|---|
| Dimensions | 31.8 in x 17.3 in x 38.8 in |
| Output Range | 30-200A |
| Wire Feed Speed Range | 50-700 ipm |
| Processes | MIG, Flux-Cored |
| Input Phase | Single Phase |
| Welding Process | MIG, Flux-Cored |
| Input Voltage | 230V |
| Duty Cycle | 60% @ 200A |
| Rated Output | 200A |
Emphasizes user responsibility for safe operation and maintenance of welding equipment.
Details risks of electrocution from live parts and wet conditions during welding.
Advises on eye and skin protection from welding arc radiation and spatter.
Warns about hazardous fumes, toxic gases, and ventilation needs during welding.
Covers precautions against sparks, flammable materials, and container welding hazards.
Guidance on selecting a suitable location and ensuring proper ventilation for the welder.
Instructions for proper input power and grounding connections according to electrical codes.
Explanation of the function of each control on the welder's front panel.
Steps for setting polarity, starting the welder, and performing initial checks.
To Next Page