To Next PageTo Next PageWhat to do if Lincoln Electric RANGER 300 D engine will not go to high idle and circuit breaker CB8 located in engine compartment is open?
If the engine of your Lincoln Electric Welding System will not go to high idle and the circuit breaker CB8 located in the engine compartment is open, reset CB8.
What to do if Lincoln Electric RANGER 300 D wire feeder does not work when connected to welder 14 pin amphe- nol (DLX models only)?
If the wire feeder on your Lincoln Electric Welding System (DLX models only) doesn't work when connected to the welder's 14-pin amphenol, check if the Wire Feeder Power circuit breaker is open and reset it. Inspect the control cable for faulty wiring and repair or replace the cable if necessary. If problems persist, replace the wire feeder with one that is known to be in good working order.
General| Max Output | 300 A |
|---|---|
| Engine (Diesel) | Kubota D722 |
| Engine (Gasoline) | Not applicable |
| Fuel Type | Diesel |
| Type | Welder/Generator |
| Welding Processes | Stick, TIG |
| Output Range | 50 - 300 Amps |
| Duty Cycle | 100% |
| Rated Output Voltage | 25 Volts |
| Generator Output | 10, 000 Watts AC |
| Generator Output (Peak) | 10, 000 Watts |
| Generator Output (Continuous) | 8, 500 W |
| Auxiliary Power | 120/240 V, 60 Hz |
| Engine Power | 18 HP |
| Fuel Tank Capacity | 12 Gallons |
| Dimensions | H: 36 in (914 mm) |
Covers Proposition 65, engine exhaust, and magnetic field warnings.
Details risks of electric shock, arc rays, fumes, and gases.
Addresses welding sparks, cylinder handling, and electrically powered equipment safety.
Outlines machine specs, engine details, and physical dimensions.
Guides on placement, storage, tilting, and pre-operation engine checks.
Details machine grounding, cable connections, and premises wiring.
Describes the unit's general purpose, features, and construction.
Explains output panel controls and diesel engine operation.
Details various welding modes, applications, and auxiliary power usage.
Lists scheduled maintenance tasks and required parts for the engine.
Covers oil, fuel, air cleaner, cooling system, and battery maintenance.
Provides steps to diagnose and resolve common machine problems.
