No. HP & Dimensions Net
Product Rated Output Output Engine of Speed H x W x D Weight
Name Current/Voltage/Duty Cycle Range Model Cyl. (rpm) inches (mm) lbs. (kg)
Ranger 305G 305A DC CC/29V/100% 20-305A DC Kohler OHV Command 2 23 @ 3600 36.2 x 21.5 x 42.3 510
300A DC CV/29V/100% 40-300A Pipe CH23S Gasoline (920 x 546 x 1073) (231)
20-250A DC TIG Choice of Mechanical
14-29V CV or Electric Fuel Pump
10,500 watts peak
9,500 watts continuous
The Ranger
®
305G is a powerful stick, TIG, wire and pipe welding
engine driven welder that is ready for all day, everyday performance.
Rugged and dependable, the Ranger
®
305G is built with a totally
enclosed case for maximum protection; Lincoln’s Chopper
Technology™ for an arc operators appreciate; and a 12 gallon fuel tank
that will last you through the entire day. Lincoln’s Ranger
®
305G ...
it’s ready for a workout.
Ranger
®
305G
ENGINE DRIVEN WELDERS
• Gasoline Engine-Driven Welder
- A powerful 300 amp DC CC/CV gasoline engine-driven welder. All
rated outputs at 100% duty cycle 104°F (40°C).
- Only compact gasoline welder in N. America rated at 29V for 300
amps of stick welding.
• 23 HP Kohler
®
Gasoline Engine
- Increase from 22 HP to 23 HP for plenty of engine horsepower.
- 2-cylinder, 4-cycle OHV (overhead valve) air-cooled.
• Multi-Process Welding
- Excellent DC multi-process welding for general purpose stick,
downhill pipe (stick), TIG, cored-wire, MIG (CO
2
and blended gas)
and arc gouging.
• Digital Weld Meters
- Digital weld meters for amps and volts makes it easy to precisely
pre-set your procedures and monitor actual welding output.
• Superior Arc Performance
- Lincoln’s Chopper Technology provides easy starts, a smooth
arc, low spatter and excellent bead appearance.
• 10,500 Watts Peak Single-Phase AC Generator Power
- 10,500 watts peak for motor starting. 500 watts more!
- 9,500 watts contiuous for high capacity needs such as a back-up
generator, powering a Pro-Cut
®
plasma cutter or an Invertec
®
inverter welder. Also for lights, a grinder or other power tools.
• Skewed Rotor Design
- Skewed rotor design provides AC power suitable for operating
Lincoln Pro-Cut
®
plasma cutters and inverter power sources.
Lincoln was first in the welding industry with this feature.
• Choice of Mechanical or Electric Fuel Pump
- Mechanical for most environments.
- Electric for high altitude operation.
• One-Pak
®
Package
- Convenient way to order a welding system. See inside.
• Three-Year Warranty
- Three-year Lincoln warranty (parts and labor) on welder.
(Engine is warranted separately by the engine manufacturer).
300 Amp DC Gasoline Engine
Driven Welder
TECHNICAL SPECIFICATIONS
Publication E6.117 1/07
www.lincolnelectric.com
Advantage Lincoln
Stick, TIG, MIG, Flux-Cored, Gouging
Processes
Output
Input
kW
5.10
P
L
I
N
C
O
L
N
E
L
E
C
T
R
I
C
To Next Page
Need help?
General
