2.1A-38018-B03
LINCOLN GmbH & Co. KG • Postfach 1263 • D-69183 Walldorf • Tel +49 (6227) 33-0 • Fax +49 (6227) 33-259
Page 3 of 22
Subject to change without notice
Owner Manual
Multiline Pump Model 230
Safety Instructions
• If ignoring the safety note might result in machine damages
and malfunction, the word CAUTION is added.
• Warnings directly fixed to the machine must always be
observed and must be kept in completely legible condition.
• This symbol warns of an electrical current.
Safety symbol
acc.to DIN 4844-W8
• The notes referring to safety contained in the Operating
Instructions whose failure to observe them may result in
personal injury are marked by the symbol above.
Safety symbol acc. to
DIN 4844-W9
• The Operating Instructions include general instructions
which must be followed when a pump/lubricating unit is
installed, operated or serviced. Therefore, it is absolutely
necessary for the fitter and specialist/user to read the
Operating Instructions before a unit is installed and put into
operation. The Operating Instructions must always be
available on the site where the machine/system is installed.
• All general safety instructions contained in this main
chapter on safety must be observed as well as all special
safety instructions given in other main chapters.
CAUTION
Hazard Marking in the Operating Instructions
Staff Qualification and Training
• The staff responsible for operation, maintenance, inspec-
tion and installation must be adequately qualified for these
jobs.
• The user must properly regulate the field of responsibility
and supervision of the personnel.
• If the personnel is not in command of the necessary
expertise, they must receive the appropriate training and
instructions. If necessary, this can be done by the manu-
facturer/supplier on behalf of the machine user.
• Furthermore, the user must ensure that the contents of the
Operating Instructions are fully understood by the person-
nel.
Hazards Resulting from Failure to Observe the
Safety Instructions
• Failure to heed the safety warnings may result in damage
to equipment and the environment and/or personal injury.
• Failure to observe the safety notes may result in the loss of
all claims for damage.
• As an example, in the following we list some dangers which
may result from failure to observe the warnings:
- failure of machine/system to fulfill important functions
- failure of specified methods for maintenance and repair
- personal injury due to electrical, mechanical and chemical
influences
- danger to the environment due to leakage of harmful
materials
Safety-Conscious Working
Observe
- the safety instructions given in the Operating Instructions,
- the prevailing national regulations for the prevention of
accidents
- any working and shop regulations and accident prevention
measures of the user
To Next Page