To Next PageTo Next PageWhy is Lincoln Measuring Instruments meter inaccurate?
If the Lincoln Measuring Instruments are inaccurate, the scale factor may not be correct for the fluid you're measuring. To resolve this, enter program mode and check and reset the program factor.
What to do if Lincoln Measuring Instruments have slow or no fluid flow?
If you're experiencing slow or no fluid flow with your Lincoln Measuring Instruments, several factors could be responsible. The filter in the swivel nut might be clogged, so clean or replace it. Alternatively, the pump pressure could be low; try increasing the pump pressure. If these steps don't resolve the issue, foreign material may be jamming the meter.
What to do if Lincoln Measuring Instruments meter does not latch for batching?
If the Lincoln Measuring Instruments meter does not latch for batching, it might be due to several reasons. First, ensure the meter is in AUTO mode by pressing the AUTO button and programming the batch size. Second, the meter may not have been reset after the prior batch, so press the RESET button. Finally, low batteries can cause this issue; check for the battery icon, replace the batteries, and then push the RESET button.
What to do if Lincoln Measuring Instruments display is blank?
If the display of your Lincoln Measuring Instruments is blank, the meter may be asleep; try pushing the reset button. Alternatively, the batteries might be dead; replace them and push the reset button. A program error could also cause this; remove and reinsert the battery pack, then push the reset button. Lastly, a loose battery connection could be the culprit; remove the battery pack, check the connection, and push the reset button.
How to fix battery icon on Lincoln Measuring Instruments?
If your Lincoln Measuring Instruments show the battery icon, it means the batteries are low and need to be replaced.
General| Brand | Lincoln |
|---|---|
| Model | 905 |
| Category | Measuring Instruments |
| Language | English |
Test procedure to calculate the absolute scale factor for accuracy.
Guide to resolving battery, display, batching, flow, and accuracy problems.
