LINCOS
®
AUTOMOTIVE TOOLS
12
SCISSOR VEHICLE LIFT STD-5335A
CHAPTER 4:
INSTALLATION
Only skilled technicians, appointed by the manufacturer, or by
authorized dealers, must be allowed to carry out installation.
Serious damage to people and to the lift can be caused if
installations are made by unskilled personnel.
Always refer to the exploded views attached during installation.
Important notice
These instructions must be followed to insure proper installation
and operation of your lift. Failure to comply with these instructions
can result in serious bodily harm and void product warranty.
Manufacturer will assume no liability for loss or damage of any
kind, expressed or implied, resulting from improper installation or
use of this product. Please read entire manual prior to installation
Rotary Hammer Drill or Similar
3/4” Masonry Bit
Hammer
4 Foot Level
Medium Pipe Wrench
Crow Bar
Open-End Wrench Set: SAE/Metric
Chalk Line
Socket And Ratchet Set: SAE/Metric
Crow Bar
Hex-Key / Allen Wrench Set
Medium Flat Screwdriver
Tape Measure: 25 Foot Minimum
Needle Nose Pliers
4.1. TOOLS
To Next Page
Loading...
