LINCOS STD-5335A - Page 18

LINCOS
®
AUTOMOTIVE TOOLS
18
SCISSOR VEHICLE LIFT STD-5335A
5.3. CHECKS NO LOAD
5.4. CHECK WITH LOAD
Carry out two or three complete cycles of lowering and lifting and check:
• the safety devices for proper operation
• proper oil level in the tank
• no leakage and blow-by in hydraulic line and pneumatic line
• cylinder for proper operation
• the lift for reaching its maximum height
WARNING: Please follow carefully the instructions in the coming paragraph for
avoiding damages on the lift.
Carry out two or three complete cycles of lowering and lifting and check:
• Repeat the 5.3 section , and check no strange noise during lifting and lowering