Line 6 POD 2.0 Upgrade Guide

Welcome:
I
NSTALLING
Y
OUR NEW 2.0 CHIP
UP•7
and the chip’s notch on the same side. Seat the chip gently in place first, so that all its
legs are ready to go into socket slots; you may have to squeeze some of the legs to get
them lined up. With all the legs lined up, press the chip into place. Check the edges of
the socket to see that all the legs made it in to slots, and none are sticking out the
sides. As long as everything looks good, you’re ready to button your POD up.
Step 6 - Put the POD’s bottom cover in place, and replace the screws. That’s it, your
POD has been transformed to Version 2.0!
POD 2.0 Upgrade Guide Page 7 Wednesday, June 21, 2000 9:20 PM

Line 6 POD 2.0 Specifications

General

Amp Models	32
Presets	36 Factory, 36 User
A/D Resolution	24-bit
D/A Resolution	24-bit
Technology	Digital
Effects	16
Inputs	1 x 1/4" Instrument
Outputs	2 x 1/4" Stereo, 1 x 1/4" Headphone
MIDI	In/Out
Connectivity	MIDI
Power Supply	9V DC (included)
Dimensions	10.5 x 7.5 x 2.5 inches
Type	Guitar Amp Modeler and Effects Processor