FRONT PANEL CONTROLS
2 • 1
FRONT PANEL CONTROLS
If you haven’t already done so, turn to the inside back cover of this manual and
notice that it folds out. Ooh, pretty pictures! The idea is to have this essential
pictorial reference always opened out while you’re thumbing through the manual.
And if you photocopy the back of it, you’ll have a handy template for making a
note of your favorite settings. The boxed numbers that pop up throughout the
manual correspond to the numbers on the foldout’s illustrations.
Power Switch - Left side of front panel. Flip to bring your POD to life.
Guitar Input - Right side of front panel. Plug your guitar in here. There is
also a line level input on the back for use when you are re-amping (processing
tracks playing back from tape or disk), or when you are processing non-guitar line
level sources. This is also great for the line level output from many wireless systems.
Make you sure you set the...
Input Select Switch - Right side of front panel. This switch selects
either the front panel Guitar Input or the rear panel Line Input. Pick one.
Phones - Left side of front panel. Plug in your headphones here for silent
practicing. Volume’s set by the Output Level knob. The headphone amplifier is
designed to provide hot signals for a variety of headphones. As a result, you can get
very loud output from this connector. Be sure to set levels carefully so you don’t
blow your head off when listening to your POD through your phones.
1
2
3
4