EasyManuals Logo

Line 6 POD PRO User Manual

Line 6 POD PRO
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
SERIAL NO:
Y
OU
SHOULD
READ
THESE
I
MPORTANT
S
AFETY
I
NSTRUCTIONS
K
EEP
THESE
INSTRUCTIONS
IN
A
SAFE
PLACE
The serial number can be found on the back panel of your
POD Pro. Please note it here for future reference:
CAUTION:
To reduce the risk of fire or electric shock,
do not remove screws. No user-serviceable parts inside. Refer
servicing to qualified service personnel.
The lightning symbol within a triangle means
“electrical caution!” It indicates the presence
of information about operating voltage and
potential risks of electrical shock.
The exclamation point within a
triangle means “caution!” Please
read the information next to all
caution signs.
POD Pro Pilot’s Handbook © 2000, Line 6, Inc. Line 6, POD, POD Pro, Bass POD, Flextone, Floor Board, FB4, AX2,
and Amp Farm are trademarks of Line 6, Inc. All other product trademarks are property of their respective owners.
Before using your POD Pro, be sure to carefully read the applicable
items of these operating instructions and the safety suggestions.
1. Obey all warnings on the POD Pro and in this Pilot’s Handbook.
2. Do not place near heat sources, such as radiators, heat registers, or appliances which produce heat.
4. Guard against objects or liquids entering the enclosure.
5. Connect only to AC power outlets rated 100-120V or 230V 47-63Hz (depending on the voltage range of the unit;
refer to the back panel). Current ratings should be 400mA for the 120V range and 200mA for the 230V range.
6. Do not step on power cords. Do not place items on top of power cords so that they are pinched or leaned on. Pay
particular attention to the cord at the plug end and the point where it connects to the amp.
7. Unplug your POD Pro when not in use for extended periods of time.
8. Do not perform service operations beyond those described in the POD Pro Pilot’s Handbook. In the following
circumstances, repairs should be performed only by qualified service personnel:
•liquid is spilled into the unit
•an object falls into the unit
•the unit does not operate normally or changes in performance in a significant way
•the fuse is blown (replace with 400mA timed fuse for 120V, and 200mA timed fuse for 230V)
•the unit is dropped or the enclosure is damaged
9. Prolonged listening at high volume levels may cause irreparable hearing loss and/or damage. Always be sure to
practice “safe listening.”
WARNING:
To reduce the risk of fire or
electric shock, do not expose this appliance to
rain or moisture.
CAUTION:
This equipment has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Line 6 POD PRO and is the answer not in the manual?

Line 6 POD PRO Specifications

General IconGeneral
MIDI ControlYes
Form FactorRackmount
TechnologyDigital
EffectsAmp Modeling, Cabinet Modeling
PresetsUser and Factory Presets
ConnectivityMIDI

Related product manuals