To Next PageTo Next Page
Need help?Do you have a question about the Line 6 POD PRO and is the answer not in the manual?
General| MIDI Control | Yes |
|---|---|
| Form Factor | Rackmount |
| Technology | Digital |
| Effects | Amp Modeling, Cabinet Modeling |
| Presets | User and Factory Presets |
| Connectivity | MIDI |
Guide to getting started quickly without reading the full manual.
Instructions for registering the product to receive benefits and updates.
Information on accessing Line 6's online resources for support and information.
Introduction to the POD and its core technologies, including modeling.
Explanation of Line 6's modeling technology for guitar tones.
Details on software models of amplifiers and speaker cabinets.
Explanation of Line 6's Acoustically Integrated Recording technology.
Guide to customizing amp models and effects settings.
Information on transferring sounds between Line 6 products.
Description of power, input jacks, and headphone output.
Function of Manual button and Channel Up/Down controls.
Controls for selecting amplifier and effect models.
Controls for shaping tone, adjusting levels, and tweaking effects.
Utility functions including tuner, noise gate, and tap tempo.
Buttons for saving sounds and managing MIDI settings.
Description of line level audio I/O and stereo effects loop.
Using POD for re-amping and processing non-guitar signals.
Outputs for tuners and connecting wireless guitar systems.
Explanation of output modes and connections for studio and live.
Connections for digital output and clock synchronization.
MIDI connections and port for foot controllers.
Setting the output and signal processing mode for studio use.
Details on using the guitar and line level inputs for studio recording.
Explanation of various outputs for studio interfacing.
The unprocessed output for re-amping or tuner use.
Using the stereo effects loop in a studio setup.
Details on balanced XLR and unbalanced 1/4-inch analog outputs.
Connecting digital outputs and managing clock signals.
Using POD for re-amping recorded guitar tracks in the studio.
Integrating external stomp box effects with POD in a studio.
Warning about potential noise from computer monitors.
Setting the output and signal processing mode for live performance.
Details on using the guitar and line level inputs for live use.
Explanation of various outputs for live performance.
The unprocessed output for live tuners or stage use.
Using the stereo effects loop in a live setup.
Details on analog outputs for live stage and PA systems.
Optimizing POD's sound for different speaker cabinets in live mode.
Integrating external stomp boxes into a live setup with POD.
Overview of Line 6 foot controllers like Floor Board and FB4 for live use.
Using POD as a tone-shaping front end for another guitar amplifier.
Explains the concept of amp and cab modeling and selection.
Comprehensive descriptions of all modeled amplifier types and their inspirations.
List of available cabinet models and how to select them.
Using SoundDiver software for advanced editing of POD effects.
Introduction to the various effects available on the POD.
Details on Reverb and Compressor effects.
Details on Tremolo, Chorus, and Flanger effects.
Explanation of Rotary Speaker and Delay effects.
Control for the built-in noise gate.
Descriptions of effects combined with delay.
Using manual mode and saving sounds to memory locations.
Transferring sounds and sharing them with other users.
Editing existing sounds and customizing amp/effect settings.
Steps for customization mode and factory memory reset.
Introduction to the Floor Board and how to connect it.
Explanation of modes and channel selection using the Floor Board.
Using the Floor Board for editing, saving, tap tempo, tuner, wah, and volume.
Controlling effects, Drive/Boost, EQ, Tremolo, Delay, and Reverb via Floor Board.
Basic channel switching and tap tempo with the FB4 controller.
Introduction to MIDI protocol, messages, and connections.
Using MIDI for channel selection and parameter control.
Using Sysex for sound transfer and backup via MIDI.
Using Emagic SoundDiver for advanced editing and library management.
Tips for resolving issues with SoundDiver setup and communication.
A table summarizing amp models, their basis, and settings.
Detailed breakdown of parameters for each effect.
Table mapping POD channels to MIDI program change numbers.
MIDI control mapping for Amp Model, Drive, Bass, Mid, Treble, etc.
MIDI control mapping for Delay, Reverb, Wah, Volume, etc.
MIDI control mapping for Chorus, Rotary, Cabinet Type, etc.
Contact details for Line 6 customer service and support.
Overview of other Line 6 amplifiers and effect pedals.
Details of the limited warranty for Line 6 products.
Procedures for returning products for factory service.
