REAR PANEL CONNECTIONS
2 • 12
products to process it. The line level input on your POD Pro helps you make
the connections to these signals. Don’t forget to set the front panel Input Select
switch to the Line Input position.
Tuner Output – Want to use a stage tuner with your POD? The
Unprocessed Direct Out is a perfect signal source.
Wireless Guitar Connection – Many wireless guitar systems have a line
level output. You can plug it into the POD Pro rear panel Line Level Input,
and you’re ready to rock. Don’t forget to set the front panel Input Select switch
to the Line Input position.
Stereo Effect Loop - POD Pro’s Stereo Effect Send and Return are pre-
Master Volume. When it comes to cabling, there are important things to know:
Use The Right Cable! While hooking up your effect send/return, be sure to
use a stereo cable to connect them to other devices. If you are connecting to a
device with separate left and right inputs or outputs, you’ll want to use a standard
“insert” cable, which gives you a single stereo quarter inch connector for the POD
3
3
POD Pro Manual Ch. 2 - Rev C Page 12 Monday, September 11, 2000 10:57 PM
To Next Page
Loading...