LIVE SETUPS: OUTPUTS
4 • 3
This is primarily intended for re-amping (see the Re-Amping section in
the previous chapter on Studio hookups) but can also be used for other
things. Like, if you have a stage tuner you’d like to use with your POD Pro,
you can feed it with this unprocessed output, so that it gets a nice clear
signal to do its tuning thing with.
Stereo Effects Loop – These quarter inch TRS -10dBV unbalanced
connections give you a stereo effect send and return so you can patch
additional effects into POD’s signal chain. If you’re connecting to mono
effects units, just use mono 1/4 inch cables. If you need a stereo connection,
you’ll have to use “insert” cables, wired Tip=Left and Ring=Right, as is the
generally available standard:
To Next Page
Loading...