SETTING UP IN THE STUDIO: OUTPUTS
3 • 3
Unprocessed Guitar Out – “Unprocessed!? I thought this POD thing was
supposed to process my sound and make it sound like a wall of Marshalls!”
Don’t worry, your POD does that, but we’ve also given you this handy
connection to help you get up to other mischief. This is primarily intended
for re-amping (see the Re-Amping section below) but can also be used as an
output to an outboard tuner or other device.
Stereo Effects Loop – These quarter inch TRS -10dBV unbalanced
connections give you a stereo effect send and return so you can patch
additional effects into POD’s signal chain. If you’re connecting to mono
effects units, just use mono 1/4 inch cables. If you need a stereo connection,
you’ll have to use “insert” cables, wired Tip=Left and Ring=Right, as is the
generally available standard:
To Next Page
Loading...