Q
UICK
S
TART
G
UIDE
:
“M
ANUAL
? I
DON
’
T
NEED
NO
STINKING
MANUAL
!”
1 • 1
Q
UICK
S
TART
G
UIDE
or:
“M
ANUAL
? I
DON
’
T
NEED
NO
STINKING
MANUAL
!”
1. Turn the POD O
UTPUT
L
EVEL
control all the way down to zero.
2. Plug the POD L
EFT
and R
IGHT
O
UTPUTS
into your recorder or
mixer’s input, or the left output into your guitar amplifier’s input.
Or connect headphones to the PHONES jack on your POD.
2. If you’re plugged into a guitar amp, set A.I.R. switch to ‘AMP.’
Otherwise, set it to ‘DIRECT.’
3. Plug the power adapter into the POD P
OWER
C
ONNECTOR
, then
plug the other end into an AC wall socket.
4. Connect your guitar to the POD I
NPUT
J
ACK
.
5. Flip the P
OWER
switch near the POD power connector to fire up.
6. Select an A
MP
M
ODEL
.
7. Set the C
HANNEL
V
OLUME
to max and the B
ASS
, M
ID
, and T
REBLE
to your heart’s desire. O
UTPUT
L
EVEL
sets the output level (duh).
8. Pick an E
FFECTS
setting and adjust the R
EVERB
LEVEL and EFFECTS
TWEAK so you’re happy with the sound. Tap the TAP TEMPO
BUTTON to set the speed of the selected effect.
9. To browse pre-programmed settings use the up and down arrows.
Press the M
ANUAL BUTTON to return to where-the-knobs-are-is-
how-it-sounds operation.
10. What number 10? You’re already up and running!
But wait, before you go any further, flip to the inside back cover of this manual and
notice that it folds out. The idea is to have this handy pictorial reference always
opened out while you’re thumbing through the manual. And then you can
photocopy the back of it, and you’ll have a handy template for making a note of
your favorite POD settings. Now then, before you run off....
REGISTER AND GET GREAT FREE STUFF!
Included with your POD is a handy, postage-paid card for you to send back to us to
register your purchase, and let us know a little about yourself. It is
very important
To Next Page
Loading...
Need help?
General
