EasyManua.ls Logo

Link Controls CDO 100: 1:10-30 - Maintenance; Disengage Mechanism Operation & Safety; General Maintenance Safety and Guidelines; Routine Maintenance Checks

Default Icon
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Door Operator / STA / LC- 2973 Rev.H– 15
Operation with disengage mechanism
Warning!
To avoid injury, the following points must
be observed:-
- Drive units with a disengage mechanism
require that a fall protection is mounted
on to the door.
- Without a fall protection the door does
not comply with directive ASR. A1.7 and
may fall in an uncontrolled manner
Pull on the red loop.
The door can be moved manually.
Pull on the green loop.
The door can be moved with the operator.
8. Maintenance
Warning!
To avoid damage to the operator and door,
the following points must be observed:
- Maintenance must only be carried out by
authorized persons.
- Directive BGR 232 must be complied with.
- Worn or faulty parts must be replaced.
- Only approved parts may be installed.
All maintenance work must be
documented.
Information:
The drive unit has lifetime lubrication and
is maintenance-free.
Check that all mountings have been securely
tightened.
Check the brake (if available).
Check the limit switches and safety switches.
Check for noises and oil leaks.
Check the mounting of the operator for corrosion.
Check the housing for damage.

Related product manuals