Door Operator / STA / LC- 2973 Rev.H– 7
5. Installation
5.4 CDO100 Compact Operator - Foot Mount
Handing the operator
This operator is suitable for left or right hand installation.
The shaft can be removed and tted on the opposite side.
1. Remove the plastic caps
(if tted from hollow shaft of the operator)
2. Ensure the keysteel is secured in the keyway and t
the drive shaft ensuring that the shaft comes ush with
hollow shaft on the non-drive side. The drive shaft is
held by the M8x20mm bolt and washer.
3. Fix each mounting foot using the 2-o M8x20mm
Bolts and 2-o M8 spring washers.
As viewed from
End Elevation
‘1A’ ‘1B’
2
1
3
To Next Page
Loading...
