3
Product Overview
USB 3.0 port — Connect and share USB drives on your network or on the internet.
Light – The light on the top of your router gives you information about the router’s operation.
Light description Status
Blue (blinking)
Starting up/WPS pairing started
Wait for the router to finish starting up or WPS paring to complete.
Purple
Ready for setup
Open the Linksys app to complete setup.
Purple (blinking)
Setup in progress
Follow instructions in the app.
Blue
Connected to internet/WPS pairing successful
Router is online, everything is good.
Yellow
Weak signal (child nodes only)
Red
No internet
Not online, check with your ISP for service interruptions.
Red (blinking)
Not plugged in to modem
Make sure your router is firmly connected to the modem.
Yellow (blinking)
WPS pairing unsuccessful
To Next Page
Loading...
Need help?
General
