Linksys AE1000 User Manual

Linksys AE1000 Appendix A: Troubleshooting
8
High Performance Wireless-N USB Adapter
Appendix A: Troubleshooting
Your computer does not recognize the Adapter.
Make sure that the Adapter is properly inserted into your
computer’s USB slot and/or USB Extension Base.
The Adapter does not work properly.
Remove the Adapter, and then reinsert it into the
computer’s USB slot.
Your computer cannot communicate with the other
computers on your wireless network.
1. Make sure that the computers are powered on.
2. Make sure that the Adapter is configured with the
same Wireless Network Name (also called the SSID or
Service Set Identifier) and wireless security settings as
the other computers on your wireless network.
WEB: If your questions are not addressed here,
refer to our AE1000 support section on the web,
www.linksys.com/support/AE1000

Linksys AE1000 Specifications

General

Interface	WLAN
Connectivity technology	Wireless
Chipset	-
Internal	No
Certification	FCC, CE, IC, UL, RoHS, WEEE, IDA, C-Tick, Wi-Fi A/B/G/N
Product color	Black
Security algorithms	WEP, WPA, WPA2
Networking standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	300 Mbit/s
Link/Act LED	Yes
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	79.9 mm
Width	25.4 mm
Height	12.4 mm
Weight	11 g