Linksys AX5400 User Manual

25
Your Internet cable is not plugged in message
If you get a “Your Internet cable is not plugged in” message when trying to set up your router:
•
Make sure that an ethernet or internet cable (or a cable like the one supplied with your router)
is securely connected to the yellow Internet port on the back of the router and to the
appropriate port on your modem. This port on the modem is usually labeled Ethernet.
•
Make sure that your modem is connected to power and is turned on.
If your internet service is cable, verify that the cable modem’s
CABLE port is connected to the coaxial cable provided by your
ISP.
If your internet service is DSL, make sure
that the DSL phone line is connected to the
modem’s DSL port.
•
If your computer was previously connected to your modem with a USB cable, disconnect the
USB cable.
•
Install the router again.

Linksys AX5400 Specifications

General

Wi-Fi Standard	Wi-Fi 6 (802.11ax)
Maximum Data Rate	5400 Mbps
MU-MIMO	Yes
Beamforming	Yes
USB Ports	1 x USB 3.0
OFDMA	Yes
Frequency Bands	2.4 GHz, 5 GHz
Ethernet Ports	1 x Gigabit WAN, 4 x Gigabit LAN
Security	WPA3
Number of Antennas	4 external adjustable antennas