26
Chapter 5: Configuring the Wireless-B Broadband Router
The Administration Tab - Log
Wireless-B Broadband Router
To back up or restore a configuration, click the Backup and Restore button and the Backup & Restore
Configuration screen will appear.
To back up a configuration, click the Backup button. To restore a configuration, click the Browse button to find
the file, then click the Restore button.
Change these settings as described here and click the Save Settings button to apply your changes or Cancel
Changes to cancel your changes.
The Administration Tab - Log
The Router can keep logs of all traffic for your Internet connection. To disable the Log function, select No. To
monitor traffic between the network and the Internet, select Yes. When you wish to view the logs, click
Incoming Log or Outgoing Log, depending on which you wish to view.
Logviewer IP Address. Logviewer IP Address uses a logviewer program installed in a PC. Enter the IP Address of
the PC running the logviewer. The logviewer program is included on the Setup CD-ROM.
Change these settings as described here and click the Save Settings button to apply your changes or Cancel
Changes to cancel your changes.
Figure 5-30: Administration Tab - Log
Figure 5-31: Log Table
Figure 5-29: Backup & Restore
To Next Page
Loading...
